Operation - Minelab GP Extreme User Manual

THE MINELAB 'GP extreme'
www.minelab.com
P0529-A
Balance
Figure 4.22 Balance (Fixed/Tracking) switch
4
26
Cancel will again be to one side of centre and signals may
be complex if target is close to the coil. This setting will limit
sensitivity to deep targets.
NOTE Coils not specifically designed for the 'GP extreme'
may behave erratically or be ineffective in either E (Enhance)
or Cancel modes.
Balance (Fixed/Tracking)
Figure 4.21
The 'GP extreme' may be operated with fixed ground balance or
automatic ground balance.
• When Balance is set to Fixed, the ground balance remains
at the current level.
• When Balance is changed from Fixed to Tracking, the
detector begins to automatically ground balance through a
two stage process that is described on page 33.
To obtain the best performance from your detector, it is important to
know how different ground conditions affect the detecting process.
See "Ground Balancing" on page 33 for more detailed information.
5

Operation

However experienced you are at using a
metal detector, it is important that you
read this chapter to understand how to
use the 'GP extreme' to its full capacity.
THE MINELAB 'GP extreme'
5
27