LENCO MN-002 User Manual page 10

BASIC OPERATION
Enter
Press the ENTER button to enable the selected items.
Play/Pause
While playing a track, press the PLAY/PAUSE
again to resume playback.
Stop
In playing mode, press the STOP
to start playing from the beginning.
Tone
In any modes, you can adjust bass and treble.
1. Press TONE button on the front panel to select bass or treble, then rotate VOLUME
KNOB from low to high to adjust the effect of bass or treble.
2. Press BASS+/-, TREBLE+/- buttons on the remote control to adjust directly.
DSP
Press the DSP button to select the different sound fields: Jazz, Rock, Classic, Pop, Live,
Dance and off.
Random
Press RANDOM button on the remote control to play the tracks in a random order.
Press again to cancel and resume the normal playback order.
P.LED
Press P.LED button on the remote control to turn off or on the panel LED light.
Repeat A-B
While in playing mode, press the REP. AB button on the remote control to set the section
for repeating.
1. Press the REP.AB button once at the beginning of the section (A).
2. Press the REP.AB button at the end of the section (B). Then it will automatically repeat
section A-B.
3. Press again to exit.
Repeat
While in playing mode, press the REPEAT button to set repeat mode.
For CD, CD-R disc, press the REPEAT button to repeat playing songs.
1. Press once to repeat current track, you will see the " "on the display screen.
2. Press again to repeat all tracks, you will see the "ALL " on the display screen.
3. Press the third time to cancel.
button to pause the playback, press
button to stop playback, press PLAY/PAUSE button
9