What To Do If; Technical Data; Troubleshooting - IKEA LUFTIG User Manual

english

What to do if...

If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution
to the problem yourself, contact the After Sales
Service.
PROBLeM
Appliance not stable
Appliance is not in horizontal position
Performance in terms of oil capture
arent satisfying
Appliance doesn't work
The lamp is not working
The lamp is not working

Technical data

Dimensions
Width
Height
Depth
Lamp (Total power)
Total rating
Type of lamp and socket
Airflow Max - Exhaust
Noice Max - Exhaust
Airflow Max - Recirculation
Noice Max - Recirculation
Installation Min. Height - Gas Hoob
Installation Min. Height - Electric Hoob
This appliance has been designed,
manufactured and marketed in compliance with
the E.E.C. Directives.
to the Assembly instructions, the visit from the
After Sales Service technician or dealer may not
take place free of charge, even during the
warranty period.
POssIBLe CAUse
The appliance is not correctly installed
The appliance is not correctly installed
Oil and grease on metal filters
The appliance is not correctly connected
The lamp is not correctly fixed
The lamp is faulty
598 mm
Min.620 mm - Max.995 mm
471 mm
56 W
181 W
Halogen 28 W E14
400 m
64 dB(A)
260 m
70 dB(A)
650 mm
500 mm
If you operated the appliance wrongly, or
the installation was not carried out according
sOLUTIOn
Respect the Installation instruction enclosed
to the appliance.
Respect the Installation instruction enclosed
to the appliance.
Respect the cleaning frequency of filters as
described in the user manual
Verify that the main cable is connected to
the motor group or the plug is connected
to the socket
Verify that the lamp is screwed properly to
the lampholder
Replace the lamp bulb
/h
3
/h
3
7