TABLE FAN MODEL: TF-1681(GR) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING. Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.
ASSEMBLY INSTRUCTIONS 1) Assemble the detached base to the support pole using the screw provided. (Fig. 1) (Fig. 1 – Detached base) 2) Remove the blade locking nut (by turning it clockwise), then the locking nut (by turning it anti-clockwise) from the motor shaft. 3) Place the rear guard into position.
OPERATING INSTRUCTIONS 1. Operate the relevant push button for the required fan speed. ‘0’ for ‘OFF’, ‘1’ for Low Speed, ‘2’ for Medium Speed and ‘3’ for High Speed. 2. To make the fan head oscillate, push the oscillating knob DOWN. To stop the oscillation, pull the oscillating knob UP.
CLEANING AND MAINTENANCE Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel, wooden or abrasive cleaners to clean the appliance. WARNING: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT THE FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE REMOVING THE GUARD.