Heat & Glo RH-36 Series Owner's Manual page 29

F. Install Attic Insulation Shield
WARNING! Risk of Fire!
lation shield when there is any possibility of insulation or
other combustible material coming into contact with the
DO NOT pack insulation between the chimney and the
DO NOT
WARNING! Risk of Fire! Use of cardboard or other
-
Bend inward
90°
Figure 8.6 Prepare Attic Insulation Shield
Insulation
10-1/2 in.
(267 mm)
-
Insulation
10-1/2 in.
(267 mm)
Bend remaining tabs
to rest against pipe to
prevent insulation
from falling in.
Insert three
screws
3 in. (76 mm)
overlap
Tabs bent in to
rest against pipe
Pipe
Attic Insulation Shield
14-1/2 in. (368 mm)
diameter
6 Tabs bent
in 90°
Ceiling Firestop
Pipe
Insulation
Tabs bent in to
rest against pipe
Pipe
Attic Insulation Shield
14-1/2 in. (368 mm)
diameter
6 Tabs bent
in 90°
Insulation
Ceiling Firestop
Pipe