Download Print this page

IdeaItalia BTCK100NEW User Manual page 11

Bluetooth speakerphone

Advertisement

Available languages

Available languages

6. Pairing
Prior to using the speakerphone for the first time, you must pair it with a
Bluetooth-enabled mobile phone. The steps below describe pairing
instructions for a typical Bluetooth-enabled mobile phone.
Mettere il vivavoce e il telefonino vicino tra loro.
Place the speakerphone and mobile phone no more than 1 meter apart.
Ensure the speakerphone is under OFF mode.
Press and hold the "MFB" button for 6 seconds until the LED flash red
and blue alternatively, it is now ready for pairing.
Activate the Bluetooth function on your mobile phone and search fro
accessible Bluetooth device by referring to your mobile phone user guide
for details.
Select "BT Speaker" from the list.
Enter the pre-programmed code "0000" and press "OK" to pair the
speakerphone and the phone. When pairing is completed, the blue and
red LED stop flashing, the speakerphone is under the standby mode with
the blue LED flashes in every 3 seconds.
N.B. If the pairing cannot be completed within 2 minutes after the pairing
mode is activated, the speakerphone will power off automatically. Please
repeat steps above to pair the speakerphone and mobile phone again.
7. Connection/Link between speakerphone and mobile phone
After pairing is completed, speakerphone is always under standby mode.
Before you place or answer a call, if the headset icon is not shown on phone
screen, please follow the steps below to activate the Bluetooth connection/link
through your mobile phone or speakerphone until the headset icon is on the
screen.
On phone: Select the "BT Speaker" from the paired list on your phone screen.
On speakerphone: Short press "MFB" and select "Accept" on phone
screen to accept connection.
8. Disconnection between speakerphone and mobile Phone
Power off the speakerphone.
Select "Disconnecting" on the Bluetooth device list of your mobile phone
to remove the connection.
N.B When losing the connection/link, the speakerphone will be automatically
power off in 10 minutes. The blue LED will flash twice in every 3 seconds when
the speakerphone is not connected with mobile phone.
- 11 -

Advertisement

loading