Fisher CZ-20 Quicksilver Operating Manual page 11

SETTING UP
"Hipmounting" the CZ-20 in this manner takes about half the
weight off the handle and allows the land or shallow-water
Treasure Hunter to search much longer without arm fatigue.
NOTE: Because of the extreme sensitivity of the CZ-20 search
coil, hipmounting the control housing may produce a false
signal when the search coil reaches the end of its arc (on the
side that the control box is attached to your belt). Depending
on your stem length and how high you have the housing
hipmounted, the search coil may actually detect the housing.
1. Grasp the handle grip firmly with one hand and
the control housing with
the other.
2. Slide the control housing off the mounting
bracket by pulling it toward
you.
3. Slide the belt clip into grooves on the bottom of
the control housing. This
is a snug fit, and you'll have to bend the clip slightly.
4. Unwrap just enough of the coil cable to allow
for searching.
5. Slip the control housing onto your belt, left side
for right handers, right side for left handers.
9