LENCO DR-05 BT User Manual page 8

Buttons
No.
6
Treble
Snooze
7
Dim
8
Sleep
9
Number buttons
10
Standby
11 Information
12 Volume+/-
13 Next/Previous
Stop
14
Bass
15
ID3
16
17
Alarm
18 BT Pair
19
Random
20
MO/ST
Description
Press Treble button and use the Volume+/- button to adjust the treble.
If the alarm is set to buzzer mode, when the alarm goes on, press Snooze to
enter the nap mode, the alarm will go on again 5 minutes later.
Press to select 3 kinds of brightness of the display screen.
Press to set the sleep time: sleep off/10/15/30/45/60/90/120 minutes.
When the time out, the unit will enter sleep mode automatically.
In DAB or FM mode, long press the number buttons 0-9 to save 10
stations directly. To save more, please refer to operations on Page 9.
Press to turn on the unit; or turn to standby mode.
In FM or DAB mode, press to check the information of the stations.
Press to adjust the volume to a comfortable level.
In BT mode, press to skip to next or previous track/song.
In FM mode, press to tune the frequency up or down by steps of
0.05MHz; long press to skip to the next or previous available frequency.
Press to stop playback, press
Press Bass button and use Volume+/- buttons to adjust the bass.
While playing MP 3 tracks, press to display information
of current track: album, artist, etc.
In standby status, press to enter time setting interface, it show Time Auto Update,
choose On to update the time automatically when it receives DAB station or FM
RDS signal.
In standby status, press to set the time and alarm 1, alarm 2.
Press once to enter Time setting status, press twice to enter Alarm 1
setting status. Press the third time to enter Alarm 2 setting status.
In Time or Alarm setting status, use
press to confirm, and the system automatically skip to the next setting status.
When in time setting interface, the screen display the YYYY/MM/DD.
/
Use the to select the digits of the date, then press
select the 24/12 hour, next to set the Hour/Minute, press
When in alarm setting interface, the words "0:00" flash, press
to select the digits of the alarm time, press
the alarm options: Daily, Weekdays, Weekends, Once. Next to select
the alarm mode: Buzzer mode, FM mode, USB mode,DAB mode. At last to set
Alarm volume level. When finish setting Alarm 1, you can set Alarm 2.
To cancel the alarm, press ALARM button, then select OFF to cancel.
Press to activate the BT function of the unit to pairing status if
unpaired. In paired status, press to disconnect the devices.
Press to play tracks in a random order, press again to
cancel.
In radio mode, press to switch stereo on if there's strong reception.
If the reception is weak, you can not turn stereo on.
to re-start.
or
to confirm. Then select
7
to select contents, then
and then
to finish.
or