Warming Drawer - GE JGB910 Technical Service Manual

Push the
right rail
release down.
Pull the left rail release up.

Warming Drawer

Warming Drawer
Thermo Disc Thermo Disc
Warming Drawer
The warming drawer will keep hot, cooked foods at
serving temperature. The warming drawer cannot be
used during a self-clean cycle. The ON signal light is
located above the control knob.
Remove Warming Drawer
1. Pull the drawer straight out until it stops.
2. Pull up on the left drawer tab while pushing down on
the right tab to release drawer stops.
3. Pull drawer straight out to remove.
GEA00165
NOTE: Electrical warming components are accessible
Warming Drawer Warming Drawer
Heating Element Heating Element
when the warming drawer is removed.
GEA00133
Replace Warming Drawer
1. Place the left drawer rail around the inner left rail
guide and slide and push it in slightly to hook it.
2. Place the right drawer rail around the inner right rail
guide and slide and push it in slightly to hook it.
3. Slide the drawer all the way in.
NOTE: To access the infinite switch for the warming
drawer, remove the lower control panel.
– 11 –