Sd Card Installation - Fisher-Price Kid Tough Video Camera User Manual

SD Card Installation

IMPORTANT! Use only a new or clean SD card in the video camera. Once
inserted (if not using a new or clean SD card), files (e.g. photos or pictures)
on the SD card will be erased. This is intentional, to protect the video camera
from a virus or malware, and to protect your PC.
• Your video camera comes set up to take 320 x 240 QVGA quality videos,
and can store approximately 15 minutes of video. If you'd like to take higher
quality videos you can insert a new or clean SD card (not included) and take
640 x 480 VGA quality videos.
Note: A 1 GB SD card can store approximately 30 minutes of the higher
quality video.
• Turn the battery compartment lock a ¼ turn with a slotted or Phillips
screwdriver. Open the battery compartment door.
• Locate the SD card slot below the battery compartment.
• Insert a new or clean SD card into the slot.
Hint: Once you have used an SD card in the video camera, and put that same
SD card back into the device at a later time, you will not lose what was recorded
previously from our video camera. To avoid mix-ups and disappointments, it's
best to reserve a particular SD card for use only in the video camera.
• Close the battery compartment door and turn the lock ¼ turn with a slotted or
Phillips screwdriver.
SD Card (not included)
SD Card Slot
13