BYD S6 Owner's Manual page 22

Seat belts with the pre-tensioning
device (optional)
The driver and front seat belts are
provided with a pre-tensioning device,
it is activated in the case of a serious
front collision.
When the sensor detects a serious
front collision, the retractor will retract
the front seat belts rapidly to protect
the passenger safety effectively.
Even if there is not a passenger in the
front seat, the pre-tensioning device
of the seat belts will be activated as
well.
In the event of a collision, the front
seat belt pre-tensioning device and
the SRS air bag may not be activated
at the same time.
In the event of a collision, when the
seat belt pre-tensioning device is
activated, noise may be made and a
small amount of innocuous gas may
be released. The gas does not
indicate a fire and is generally
harmless to humans.
1-16 Emergency Treatment
BYD AUTO S6 Owner's Manual
Tips
 The seat belts equipped on the
car are designed according to the
adult frame. Children should be
prudent in using the seat belts.
 Position the child seat on the
back seat and seat the child in the
child seat. Meanwhile, the seat
belt should be fastened well for
protection. It is prohibited for
children to sit in the front seat.
 Do not seat a child on their knees
or arms. Otherwise, the child may
be seriously injured or even killed.
 Do not let children stand or kneel
on the front or back seat. During
emergency braking or a collision,
unprotected children may be
seriously injured.
 Whilst driving, passengers in the
car must fasten the seat belts
correctly. Otherwise, during
emergency braking or a collision,
they are more prone to be
severely injured.
 One seat belt must be applied to
one passenger only. It is
prohibited for one seat belt to be
shared by two or more
passengers - even by children.
 Do not over-tilt the backrest. The
seat belt provides the best
protection when the backrest is in
the upright position.
 Do not damage the seat belts, or
inhibit or trap them in the seats or
car doors.
 Check the seat belt regularly to
see whether it is cut, worn or
loose. Damaged parts must be
replaced with new ones. Do not
disassemble or modify the
system.
 Keep the seat belts clean and dry.
Do not place any decorative
articles on the seat belts.
 After a serious collision, the seat
belt system (including bolts) must
be replaced. Even if the damage
is not obvious, the whole system
still has to be replaced.
 After the latch is inserted, make
sure it is locked up to the buckle
firmly and the seat belt is not
twisted.