Connections; Specifications - JBL CS1215B Owner's Manual

CONNECTIONS

Connect the "+" and "–" terminals on the subwoofer box to the amplifier's outputs, observing proper polarity.
Use at least 0.5mm speaker wire for the connections to the subwoofer box.
2
Subwoofer Box
Note: We recommend a JBL amplifier to power your CS1215B. Set the amplifier's crossover to Low-Pass Filter (LPF)
and set the crossover frequency to a value within the range marked in gray in the drawing below (50Hz–100Hz). For
details regarding the installation of your amplifier or other amplifier settings, please consult the installation manual for
your amplifier.

SPECIFICATIONS

CS1215B
Woofer:
Power handling, RMS:
Power handling, Peak:
Sensitivity (2.83V/1m):
Frequency response:
Impedance:
Dimensions:
340mm
(13-3/8")
Features, specifications and appearance are subject to change without notice.
This product is designed for mobile applications and is not intended for connection to the mains.
A valid serial number is required for warranty coverage.
Bridged Power Amplifier
L Speaker Out R Speaker Out
Bass-reflex box
300mm (12")
275W
1100W
90dB
35Hz – 200Hz
4 ohms
205mm
(8-1/16")
368mm
(14-1/2")
408mm
(16-1/16")
Stereo Bridged
3
www.jbl.com