Technical Data Motor And Esc; Connection/Cabeling - Carson FY5 Destroyerline Instruction Manual

g. Technical Data Motor and ESC
Technical data motor:
Motor
U/min
GB
U/min @ 14.8 V
Short term
Dimensions (A- Ø x L)
Technical data ESC:
Forward
Reverse
Input voltage
h. Connection/Cabling
Connect the ESC, motor, receiver, battery and
servo according to the following diagram.
Positive (+) and negative (-) wires of the ESC are connected with the
battery pack.
A, B and C are connected with the motor wires. The control cable of
the ESC (wires in black, red and white colour) is connected with the
throttle channel of the receiver (usually CH2).
If there are 2 battery packs, which need to be
connected in series, please refer to the
following picture.
Red wire to the positive
of the ESC
24 CARSON FY5 Destroyerline Brushless 50 040 9040
Brushless
Sensorless
1500 UpV
22 200
Short term 80 A
35.8 x 73 mm
Brushless
yes
yes
2 - 4 LiPo cells/6 - 12 NimH cells
The A, B, C wires of the ESC can be connected with the motor wires
freely (without any order). If the motor runs in the opposite direction,
please swap any two wire connections.
Red wire +
Black wire –
Black wire –
Black wire to the negative
of the ESC
+
Red power wire
(battery
positive)
-
Black power
wire (battery
negative)