Page 9
Problem Ursache Lösung Das Modell fährt nicht Sender oder Empfänger sind nicht einge- Schalten sie den Sender oder Empfänger ein schaltet Der Überhitzungsschutz hat das Auto wegen Den Empfänger ausschalten. Das RC-Auto zu starker Erwärumung angehalten etwas 30 Minuten abkühlen lassen. Tauschen Sie die Batterien aus bzw.
Page 19
Problem Cause Remedy Model does not move Transmitter switch and/or model switch is/ Switch on are off Weak or no battery in model Install charged battery The heat protector has stopped car due to Turn off receiver. Let the RC car cool down excess heat for approximately 30 minutes.
Need help?
Do you have a question about the FD-Line II and is the answer not in the manual?
Questions and answers