Final Sound 400I Center Loudspeaker - Final Sound 400i User Manual

5. Final Sound 400i center loudspeaker

For building a home theatre based on 400i using floor standing models, Final recommends a 400i
center panel. Center panels can be wall mountable or fit to a table top stand.
How to unpack a Final Sound center panel?
A Final Sound center panel comes in one packaging unit.
A Final Sound center panel package contains:
1 center panel
-
1 power supply 12VDC
-
assembly materials including screws to fix the flat-panels to the wall
-
wall bracket assembly
-
1 manual
-
a table top stand (included in the 400i package)
-
Each individual component is packed in its own carton. The easiest way to unpack is to open the
upper side of the box(check the labels), take out the separate units and carefully remove the cartons
and plastic bags. Take care to avoid putting pressure on the black loudspeaker's stator plates.
If your packaging is not complete, do not operate the system but contact your dealer.
We recommend you to save all packaging materials for possible later use.
If any unit appears to be damaged when unpacking, do not operate the damaged unit. Repack the unit
in its original carton and notify your authorized Final Sound dealer immediately.
Assembling center panels
Assembling a center panel is straightforward. The kit should contain:
wall bracket kit (the wall bracket is also used to fix the center panel to the table top stand)
1 Allen key
FINAL SOUND 400i Loudspeaker Manual vs. 1.4 -US-
.
c FS 2007RJ 12