Page 1
User Guide – HT800T Series v10/10 Professional submersible MPT1327 handheld transceivers ATEX approved Intrinsically Safe Common Information (all models) II 2 G Ex ib IIA T4 Ex ib IIA T4 HT812T/822T/882T(U) Entry HT815T/825T/885T(U) Advanced MPT1327, 8-key HT816T/826T/886T(U) Advanced MPT1327, Full Keypad...
Introduction This guide covers the ‘basics’ of your radio’s operation. To meet your exact requirements the radio may have been customised by your Entel authorised dealer. These features will be explained in a separate guide issued by the dealer. Table of Contents...
Certification Declaration of Conformity We Entel UK Limited of: Entel UK Ltd 320 Centennial Avenue Centennial Park Elstree Borehamwood Hertfordshire WD6 3TJ United Kingdom Declares under our sole responsibility that the product range: HT800 Series ATEX V2 Handheld Radio Transceiver Conforms to the following standards or other nominative documents: •...
End of Life Disposal The HT8XXT comes with a 24 month warranty, for • When your Entel transceiver reaches the end of its details see our full terms & conditions. useful life, please ensure that the unit is disposed of in an environmentally friendly way.
The battery pack has an over-current protection circuit fitted. When charging a completely discharged Note: only genuine Entel batteries should be used. Only battery i.e. first charge, ensure the battery is removed genuine batteries offer the battery charge count feature...
CHP950HS Single earpiece heavy duty ear defender headset with boom mic for hard hat & VOX* Note: The use of non Entel approved accessories will invalidate your ATEX intrinsically safe approval. Refer to certificate Sira 10ATEX 2066X for permitted accessories.
Stubby antenna VHF CAT80S Stubby antenna UHF For complete up to date list of optional accessories visit www.entel.co.uk Preparing Your Radio For Use Attaching / Removing the Battery Pack To attach, locate the pegs on the bottom of the battery and place into the slots on the radio.
Page 8
Preparing Your Radio For Use Attaching / Removing the Aerial To attach, carefully align the aerial with the socket. Screw in the aerial clockwise (taking care not to cross the thread) until it is seated firmly against the top of the radio.
HT812T/822T/882T(TU) Standard Features: • 16 position call select control • Full transmit power output (5 watts VHF, 4 watts UHF) • Dynamic power output (automatically adjusts for optimum performance) • CTCSS & DCS (analogue & digital squelch) with squelch tail elimination (removes the ‘shh’ noise) •...
Need help?
Do you have a question about the HT812T and is the answer not in the manual?
Questions and answers