The layout of your NRX Flatphone STORE BUTTON M1, M2, M3, M4 UNDER LABEL MEMORY BUTTONS MUTE BUTTON DIGITAL VOLUME CONTROL RECALL BUTTON HOLD BUTTON SPEAKER ON BUTTON HOLD INDICATION LED REDIAL/PAUSE BUTTON MESSAGE WAITING INDICATION Contents INSTALLATION Getting Connected...
2.3 DIAL MODE SETUP The NRX Flatphone can be set to auto-disconnect the line after either 60 seconds or 120 seconds if the user To NRX Flatphone can be set to either Tone or Pulse is silent. dialling as follows:...
[M1], [M2], [M3] or [M4] will dial the number stored in that memory location. Alternatively, pick up another telephone connected in parallel with the NRX Flatphone and the hold indicator will be turned Off. 3.5 RECALL The [RECALL] button can be used to access additional PBX or network operator services.
Approved Use 4. APPROVED USE 4. APPROVED USE This product may have interworking problems The NRX Flatphone can be connected to the Public The NRX Flatphone can be connected to the Public with the following networks. Switched Telephone Network (PSTN) and...
Tel No: ...... Returns Auth No: ..............Fax No: ............... Account No: ....Model No Details of Fault Date of Purchase Trojan Telecom's full liability will extend to the cost of repair or complete replacement of the returned item only.
Need help?
Do you have a question about the NRX Flatphone and is the answer not in the manual?
Questions and answers