Installation & Setup 1. INSTALLATION Connect one end of the coil cord to the handset and the other end to the handset socket located on the left hand side of the phone. Replace the handset to the cradle. Connect the small plug of the telephone line cord to the socket at the back of the unit and the other plug to the telephone socket at the wall.
Setup & Operation headset and simply press the ‘SPEAKER/HEADSET’ button 2.6 Setting The Area Code once to connect to the line. Pressing the ‘SPEAKER/ HEADSET’ button again will disconnect the telephone line - Press the MENU button twice. 'System' is displayed. and terminate the call.
Warranty locations. 3.8 Pause Button 3.11 Phonebook memory Pressing the 'PAUSE' button during dialling will put a 2 second pause in the dialling sequence. This is needed on The DBT 3000 can store up to 200 names and phone some telephone systems where you may be required to dial numbers.
Therefore it is not covered by the warranty. Trojan Telecom has built the DBT 3000 telephone to a high 7) Accidental damage such as liquid spillage or user standard. Our warranty reflects our belief that during it’s...
Need help?
Do you have a question about the DBT3000 and is the answer not in the manual?
Questions and answers