Do you have a question about the BS 36 and is the answer not in the manual?
Questions and answers
John
June 27, 2025
How do you get the clip back together no the extension hose
1 comments:
Mr. Anderson
August 24, 2025
To reattach the clip on the extension hose for the Sebo BS36:
1. Align the flexi hose with the extension tube properly. 2. Ensure the hose clip (part 1792HG) is not damaged and is positioned correctly at the top of the extension tube. 3. Push the hose into place until it clicks or fits securely. The suction helps hold it, but the clip ensures it stays fixed. 4. If the clip stays open or is loose, it may need to be replaced to maintain proper vacuum and secure attachment.
No special tools are required for replacing the clip.
If the mains cable is damaged it weiterem Gebrauch des Staubsaugers durch den Hersteller, must be replaced with a genuine SEBO part. For safety seinen Kundendienst oder von qualifiziertem Service perso- reasons this must be done by a SEBO service repre- nal ersetzt werden, um Gefährdungen zu vermeiden.
Page 4
Universalstaubsauger BS 36 Griff Handle grip Anschlußleitung Cable Filtergehäuse Dust bag housing Motorkopf Vacuum motor housing Elektrobürste Power head Teleskoprohr Attachment tube Schlauch Hose Sicherungsring Retaining ring Ein-/Aus- Schalter On / Off switch Deckel Back cover Kabelhaken Cable cleats Griffmulde...
Page 5
Filterfüllanzeige Filter level indicator Bei Aufleuchten der Kontrolleuchte (18) bitte If warning light (18) comes on check: prüfen: a) Is the dust bag full ? a) ist die Filtertüte voll ? b) Is there a blockage in the hose or power b) ist die Teppichbürste verstopft ? head ? c) ist der Saugschlauch verstopft ?
Page 6
Pos. Teile- Benennung 1870 dg Anschlussleitung mit K-Stecker für Schalter 05114 1870/1 dg Anschlussleitung mit K-Stecker für Schalter 05115 1871 dg Anschlussleitung mit CH-Stecker für Schalter 05114 1871/1 dg Anschlussleitung mit CH-Stecker für Schalter 05115 1037 EH Griff, kpl. (incl. Pos. 3) 1596 hg Griffabdeckung 1794...
Need help?
Do you have a question about the BS 36 and is the answer not in the manual?
Questions and answers
How do you get the clip back together no the extension hose
To reattach the clip on the extension hose for the Sebo BS36:
1. Align the flexi hose with the extension tube properly.
2. Ensure the hose clip (part 1792HG) is not damaged and is positioned correctly at the top of the extension tube.
3. Push the hose into place until it clicks or fits securely. The suction helps hold it, but the clip ensures it stays fixed.
4. If the clip stays open or is loose, it may need to be replaced to maintain proper vacuum and secure attachment.
No special tools are required for replacing the clip.
This answer is automatically generated