Related Manuals for RODE Microphones Podcaster
Summary of Contents for RODE Microphones Podcaster
- Page 1 Podcaster Instruction Manual www.rodemic.com ( EMC, LVD )
- Page 2 52 countries. Podcaster has been designed for any application where recorded voice clarity and direct digital connection is demanded. Designed with...
-
Page 3: Specifications
Specifi cations Acoustic Dynamic (neodymium) 28mm Principle: Active Analogue signal conditioning + Electronics: A/D and USB interface Directional Cardioid Pattern: Frequency 40Hz ~ 14kHz Range: (see graph) Sensitivity: -51dB re 1V/Pa @ 1kHz (2.8mV @ 94dB SPL) ±3dB @ 1kHz Maximum SPL: 115dB Signal/Noise:... - Page 4 Specifi cations Frequency Response Polar Response Features • High quality broadcast sound • Dynamic capsule (neodymium) 28mm • 18-bit Resolution, 8kHz to 48kHz sampling • Windows and Mac compatible • Tight cardioid pattern for superior off-axis sound rejection • Powered by USB bus •...
- Page 5 Mic Layout Integrated windshield Status LED Headphone Volume Control Headphone Output Locking collar USB Connection - 5 -...
-
Page 6: Installing The Podcaster
Installing the Podcaster The RØDE Podcaster is designed for native support in Windows XP, Vista and Mac OS X operating systems. Installing the Podcaster on Mac OS X • Plug one end of the USB cable into the microphone and the other end into your USB port on the Mac. - Page 7 Installing the Podcaster The following example is for setting up the Podcaster in Windows XP Service Pack 2. Other versions may vary slightly. Installing the Podcaster on Windows XP • Plug one end of the USB cable into the microphone and the other end into your PC.
- Page 8 The way to do this is to set the Podcaster up in front of you and raise the slider control while you are speaking at the same level you will use when recording.
- Page 9 Setting up the Podcaster Positioning your Podcaster You will find that where you position your Podcaster will alter the quality of the sound. Environment and background noise will vary every time a microphone is moved to a different location. The most successful method to...
- Page 10 Setting up the Podcaster Mounting the Podcaster The Podcaster comes with a stand mount that will allow you to connect it to a microphone stand or ‘Anglepoise® style’ arm such as the RØDE PSA-1. The mount comes with a 3/8” brass insert that can be removed.
- Page 11 3/8” insert. • Remove the locking collar from the base of the Podcaster and store it away in a safe place where it will not get lost. • Install the Podcaster into the PSM1 by fitting the microphone into the center of the web and onto the bottom mounting plate.
-
Page 12: Warranty
Warranty microphones are warranted for one year from date of purchase. You can extend that to a full ten years if you register online at www.rodemic.com. The warranty covers parts and labour that may be required to repair the microphone during the warranty period.