Hardware Setup/Installation; Connect Your Device; Connect Power And Push Power Button To Turn On Wpg-370 - ViewSonic WPG-370 User Manual

Wireless presentation gateway

Hide thumbs Also See for WPG-370:

Table of Contents

1‐5 Hardware Setup/Installation

(1) Connect your device

Note: HDMI and VGA can't be connected at the same time.

Note: USB port is for Firmware upgrade only in Intel® WiDi mode.

(2) Connect power and push power button to turn on WPG‐370.

After few seconds, when you see the below screen: the device is assigned an IP address, the system is

in Presentation mode and ready to do PC mirror from your PC/Mac. Please connect to WPG370 via

Wi‐Fi.

Table of Contents