Table of Contents
Advertisement
Enabling and Disabling Touch Input
To disable touch input in Windows,
uncheck "Use your finger as an
input device". Click the "Apply" but-
ton and the touch screen will not
longer accept any input. Make sure
you have a mouse and/or keyboard
available to attach to the system
if your Sahara NetSlate doesn't
have a digitizer panel or you will
not be able to control Windows.
Re-check the box and click "Apply"
to re-enable touch input.
Touch Action: Double Tap Settings
To adjust how fast and how far apart
your fingers can be to perform
double tap enabled actions, tap on
the "Settings" button to open the
"Double Tap Settings" control panel.
If you find it is too difficult to
perform a double-tap action, adjust
the Speed control slider toward
"Slow" and the Spatial control slider
toward "Large".
Chapter 04: Using Your Sahara NetSlate with Microsoft® Windows® 7
The first time you
calibrate your
screen you will have
to tap on 16 target
points. Afterward
you will only have 4
target points.
47
Advertisement
Table of Contents
