Trusted Computing
Enables/Disables and sets state of the Trusted Platform Module.
Main
Advanced
Trusted Computing
TCG/TPM SUPPORT
Execute TPM Command
Clearing the TPM
TPM Enable/Disable Status
TPM Owner Status
Battery Calibration
Starts battery calibration test to check battery capacity and
charge/discharge levels for more accurate battery status.
FAN Calibration
Starts fan calibration test for more efficient system cooling.
Factory default should be proper. Only run this test if system has
overheating issues or fan begins to run constantly.
Wake on LAN from S4/S5 mode
Enables/Disables system to wake from low power state by LAN
requests.
Left Programmable Button 3/4
Sets 3rd and 4th function buttons on the left side of the Tablet
PC to adjust either the Speaker Volume or Screen Brightness.
Bootup Num-Lock
Sets whether the Num-Lock key on an attached USB keyboard is
enabled or disabled by default.
BIOS SETUP UTILITY
Boot
Security
[Yes]
[Don't change]
[Press Enter]
[Enabled]
[UnOwned]
v02.69 (C)Copyright 1985-2010, American Megatrends, Inc.
Trusted Computing Screen
Exit
Enable/Disable TPM
TCG (TPM 1.1/1.2) supp
in BIOS
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Appendix A: BIOS Set-up
141