Advertisement
connecting
Before making any connections, switch off all elements of the audio system from the mains.Acuhorn
rosso superiore175 are loudspeakers applying one pair Terminal Nextgen WBT-0710 Ag for single-wire
connections. The binding posts are placed in the bottom base. They can be used as sockets for the
connection of 4mm banana plugs or can be used as binding posts for the connection of bare wires or
spade-terminated cables.The bare wires and spade-terminated cables are inserted from the left and right
side of binding posts respectively. Impedance of the loudspeakers is 4 ohm. The loudspeakers are
compatible with 8 ohm outputs in solid state amplifiers. When amplifiers are equipped with 2,4,8 ohm
outputs please test the best adjustment of an amplifier with the loudspeakers. Our loudspeakers are
high sensitivity 99 dB. They are naturally dedicated to low power tube amplifiers. They result in great
sounding setup with high 200W solid state mono power amplification. Acuhorn recommends reference
loudspeaker's cables and cleaning fluid for clear contact of terminals and cable for high sound quality.
technical specifications
acuhorn rosso superiore175 improved audio 2007
floorstanding dipol loudspeakers
wooden four acoustic chambers type
solid construction 2,5 milimeter pressed sheets
double driver acuhorn TSR200
cnc cut aluminium driver body
neodymium engine precision cut profile
high remanence neodymium magnet 14,5 Br
air gap short streaming jump 0,9 mm
nominal impedance 4 ohm
DC-resistance of double voice coil 2 ohm
sensitivity 99 dB
internal silver cable Siltech G6 series
air-teflon tunnel of cables
terminal silver WBT 0710 Ag
aluminium black anodized bases 29 x 43,6 cm
spikes for level M8 threads
holes in bases for fixing to the floor 27 x 39,2cm
weight 50 kg piece
dimensions W 20 x D 40 x H 175 cm
www.acuhorn.pl
e-mail info
acuhorn.pl
acuhorn manufacture phone
@
+48 601 622 528
Advertisement
