Advertisement
connecting
Before making any connections, switch off all elements of the audio system from the mains.Acuhorn
giovane85 are loudspeakers applying one pair Terminal for single-wire connections. The binding posts are
placed in the horn outlet. They can be used as sockets for the connection of 4mm banana plugs or can be
used as binding posts for the connection of bare wires or spade-terminated cables.The bare wires and
spade-terminated cables are inserted from the left and right side of binding posts respectively.
Impedance of the loudspeakers is 4 ohm. The loudspeakers are compatible with 8 ohm outputs in tube or
solid state amplifiers. When amplifiers are equipped with 2,4,8 ohm outputs please test the best
adjustment of an amplifier with the loudspeakers. Our loudspeakers are high sensitivity 96 dB. They are
naturally dedicated to low power tube amplifiers. They result in great sounding setup with high 200W
solid state mono power amplification. Acuhorn recommends reference loudspeaker's cables and cleaning
fluid for clear contact of terminals and cable for high sound quality.
technical specifications
acuhorn giovane85 superleggera
floorstanding loudspeakers
wooden acoustic one acoustic chambers type
single driver acuhorn superleggera
neodymium engine precision cut profile
neodymium magnet
impedance 4 ohm
sensitivity 96 dB
internal copper cable
terminal copper
weight 10 kg piece
dimensions W 20 x D 29 x H 85 cm
www.acuhorn.pl
e-mail info
acuhorn.pl
acuhorn manufacture phone
@
+48 604 610 138
Advertisement
