Advertisement
connecting
Before making any connections, switch off all elements of the audio system from the mains. Acuhorn
nero125 are loudspeakers applying one pair Terminal Nextgen WBT-0710 Ag for single-wire connections.
The binding posts are placed in the bottom base. They can be used as sockets for the connection of 4mm
banana plugs or can be used as binding posts for the connection of bare wires or spade-terminated
cables. The bare wires and spade-terminated cables are inserted from the left and right side of binding
posts respectively. Impedance of the loudspeakers is 4 ohm. The loudspeakers are compatible with 8 ohm
outputs in solid state amplifiers. When amplifiers are equipped with 2,4,8 ohm outputs please test the best
adjustment of an amplifier with the loudspeakers. Our loudspeakers are high sensitivity 96 dB. They are
naturally dedicated to low power tube amplifiers. They result in great sounding setup with high 200W
solid state mono power amplification. Acuhorn recommends reference loudspeaker's cables and cleaning
fluid for clear contact of terminals and cable for high sound quality.
technical specifications
acuhorn nero125 improved audio
floorstanding loudspeakers
wooden two acoustic chambers type
solid construction 2,5 milimeter pressed sheets
double driver acuhorn TSR200
cnc cut aluminium driver body
neodymium engine precision cut profile
high remanence neodymium magnet 14,5 Br
air gap short streaming jump 1,0 mm
nominal impedance 4 ohm
DC-resistance of voice coil 4 ohm
sensitivity 96 dB
internal silver cable Siltech G6 series
air-teflon tunnel of cables
terminal silver WBT 0710 Ag
aluminium black anodized bases 20 x 47 cm
spikes for level M8 threads
holes in bases for fixing to the floor 18 x 42cm
weight 30 kg piece
dimensions W 20 x D 50 x H 125 cm
www.acuhorn.pl
e-mail info
acuhorn.pl
acuhorn manufacture phone
@
+48 601 622 528
Advertisement
