Ssnr; Day/Night - Samsung SND-560 User Manual

Ch5. How to Operate Camera
• HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment parking
garage or gas station entrance, removing the high light makes it possible to view car
license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the screen,
remove the high light to see license plates clearly.
- HLC : Enable a user to select a mask color of high light
area from a picture.
• OFF : Not being used.
3. Select a desired mode using the Left and Right buttons and press the SET button.
Notes
• Since the following symptoms may occur according to the ambient illumination when WDR is selected, set it
to OFF.
- Color or screen changes unnaturally.
- Noise appears in the bright part of the screen.
• Since the performance of the WDR function may be affected by the area of the bright part of the screen,
optimize the installation angle for the best WDR performance.
• If you increase LIMIT, the screen display may be distorted.
• Because there can be a difference in the effectiveness of HLC according to the amount of light area in the
screen, optimize the installation angle for the best HLC performance.
• In a dark environment, the HLC is only activated when a high light that is larger than a certain area is present.
• The HLC is not activated in light or overly dark conditions.
66
NETWORK CAMERA User's Manual

5.2.5. SSNR

This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR' by using the Up and Down
buttons so that the arrow indicates 'SSNR'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR

6.DAY/NIGHT

2. Select a desired mode using the Left and Right buttons.
• OFF: Deactivates SSNR. Noise is not reduced.
• ON: Activates SSNR so that noise is reduced.
3. Set the SSNR mode to 'ON' and press the SET button. Then
you can adjust the noise reduction level.
Notes
• You cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
• When adjusting the noise reduction level of the SSNR mode, remember that the higher the level set, the more
the noise level will be reduced but that after image may also occur.
5.2.6. DAY/NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up and
Down buttons so that the arrow indicates DAY/NIGHT.
NETWORK CAMERA
DC
ATW
OFF
ON
AUTO
67
User's Manual