JVC KS-FX915R Service Manual page 6

KS-FX915R/KS-FX815
<Removal of the cassette mechanism>
Removing the head amplifier board.
1. For the 6pin wire extending from connector CN402
on the head amplifier board, disconnect it from the
head relay board.
2. Disconnect the card wire from connector CN403 on
the head amplifier board.
3. Remove the screw A attaching the head amplifier
board.
4. Move the tab a as shown in Fig.2 and remove the
head amplifier board while moving it in the direction
of the arrow.
Removing the
assembly (See Fig.1 to 3)
1. Disconnect the 6pin wire from connector CN402 and
the card wire from CN403 on the head amplifier
board (Refer to Fig.1 and 2).
2. Remove the four screws B on the bottom of the
cassette mechanism.
1-6
(See Fig.1 and 2)
cassette mechanism
Cassette mechanism ass'y
Head relay
board
6pin
wire
CN402
CN402
CN403
Head amplifier board
A
B
Head amplifier board
CN403
Head amplifier board
Fig.1
Tab a
Fig.2
Cassette mechanism ass'y
B
Fig.3