JVC KS-FX915R Service Manual page 5

Removing the main amplifier board assembly
1. Remove the front chassis.
2. Remove the bottom cover.
3. Remove the two screws C attaching the main amplifier
board assembly on the bottom of the body.
4. Remove the three screws D attaching the main amplifier
board assembly on the back of the body.
5. Disconnect connector CP401 on the main amplifier board
assembly from the cassette mechanism assembly.
Removing the Cassette mechanism assembly
1. Remove the front chassis.
2. Remove the bottom cover.
3. Remove the main amplifier board assembly.
4. Remove the four screws E attaching the Cassette
mechanism assembly from the top cover.
Removing the control switch board
1. Remove the front chassis.
2. Remove the four screws F attaching the rear cover on the
back of the front panel unit.
3. Remove the control switch board from the front panel
unit.
(See Fig.4 and 5)
(See
Fig.6 )
(See
Fig.7 and 8 )
Main amplifier board
C
Fig.4
D
Fig. 5
F
F
Fig. 7
Control switch board
Fig. 8
KS-FX915R/KS-FX815
CP401
C
E
E
Fig. 6
F
F
D
1-5