Using A Terminal Emulator Program To Program The Lc Series Printer - Keltron LC Series User Manual

Using a Terminal Emulator Program to Program the LC Series Printer

The following ASCII commands and ESCAPE functions can be used on a PC using a terminal emulator
program (such as PROCOMM or TELIX).
ASCII Printer Commands: ASCII Printer Commands:
ASCII Printer Commands: ASCII Printer Commands:
Character Character Character Character CTRL Keys (use CTRL Keys (use CTRL Keys (use CTRL Keys (use
all CAPS) all CAPS) all CAPS) all CAPS)
FNT-24 or ˆB
FNT-30
FNT-32 or ˆC
FNT-40
EOT ˆD
BS ˆH
HT ˆI
LF ˆJ
VT ˆK
FF ˆL
CR ˆM
SO ˆN
SI ˆO
XON ˆQ
AUX ON ˆR
XOFF ˆS
AUX OFF ˆT
CANCEL ˆX
ESC ˆ[
EXPANDED* ˆ\
EXPANDED ˆ]
OFF
* * * * Note: Note: T T T T he Keltron he Keltron LC Series printer LC Series printer cannot function with expanded width
Note: Note: he Keltron he Keltron LC Series printer LC Series printer
same time and can result in loss of printing functions. To correct send a CTRL X command or press same time and can result in loss of printing functions. To correct send a CTRL X command or press
same time same time and can result in loss of printing functions. To correct send a CTRL X command or press and can result in loss of printing functions. To correct send a CTRL X command or press
<SLCT><ADVN><FEED><FEED><FEED><FEED><TEST> <SLCT><ADVN><FEED><FEED><FEED><FEED><
<SLCT><ADVN><FEED><FEED><FEED><FEED>< <SLCT><ADVN><FEED><FEED><FEED><FEED><
Printer returns to default settings with a serial CTRL X command. The Clock/Calendar/Counter stamp and
program menus will always print in normal height and width. Also the Print and Character Features settings
will be maintained on power down.
Hexidecimal Hex Hex Hex idecimal idecimal/ / / / idecimal Control Action Control Action Control Action Control Action
Decimal Dec Dec Dec imal imal imal
02/02 Select 24 characters per line font (LC24's)
or 30 characters per line font (LC40's)
03/03 Select 32 characters per line font (LC24's)
or 40 characters per line font (LC40's)
04/04 End of Text or Print Buffer
08/08 Back Space: remove previous character
09/09 Horizontal Tab: advances four spaces from current position on line
0A/10 Line Feed: advance to beginning of next line
0B/11 Vertical Tab: advance 5 lines
0C/12 Form Feed: advance 10 lines
0D/13 Carriage Return: advance to beginning of next line
0E/14 All characters extended height (14 dots)
0F/15 All characters normal height (7 dots)
11/17 Transmitted if printer is ON-LINE to receive date. If received, the host
is ready to accept data.
12/18 Print head on: Transmitted after loading paper in the printer.
13/19 Transmitted if printer is taken OFF-LINE (via <SLCT>), if print buffer is
full or printer out of paper. If received, host's transmitter is off
14/20 Print head off: transmitted if out of paper
18/24 Resets printer to defaults
1B/27 Escape: Precedes various functions
1C/28 All characters expanded width* (10 dots)
1D/29 Normal width (5 dots)
cannot function with expanded width and inverted text
cannot function with expanded width cannot function with expanded width
12
and inverted text enabled
and inverted text and inverted text
TEST>. . . .
TEST> TEST>
enabled at th at the e e e
enabled enabled at th at th