Keltron LC Series User Manual

Compact printer

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

March 12, 2010

Version 3.1

Keltron LC Series

Compact Printer

User's Manual

Keltron Corporation 241 Crescent Street, Waltham, MA 02453-3487

Keltron Corporation

Voice 781.894.8710 fax 781.899.9652

Table of Contents

Need help?

Do you have a question about the LC Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Keltron LC Series

Page 1 Keltron LC Series Compact Printer User’s Manual March 12, 2010 Keltron Corporation Keltron Corporation 241 Crescent Street, Waltham, MA 02453-3487 Keltron Corporation Keltron Corporation Version 3.1 Voice 781.894.8710 fax 781.899.9652...
Page 2: Table Of Contents
Initial Power-Up and Self-Test ........................6 Interval Timer ............................6 Keltron LC Series ASCII Character Set ....................... 6 Using a Terminal Emulator Program to Program the LC Series Printer............12 Installing Paper and Ribbon in the Keltron LC Series Printer ..............14 Warranty ..............................15...
Page 3: Manual Objective
Manual programming and programming via PC covered Description The Keltron LC series is a rugged printer packaged in a metal enclosure ready to panel mount or use on the desktop. This model features compact reliable, plain paper dot matrix impact printers capable of printing from 12 through 32 columns per line (Keltron LC24s) or 15 through 40 columns per line (Keltron LC40s).
Page 4: Specifications
Specifications Power: Power: Power: Power: 110VAC ±10% (1.0A @ 9VDC) 220VAC ±10% (1.0A @ 9VDC) +5VDC ±3# (1.0A) +7.5 to 13.6VDC (1.0A) +9 to 35VDC (6 Watts) The AC models have a wall mount transformer with 5 ½ ‘cord. The DC models come with a power harness 18”...
Page 5 When power is cycled to the printer the printer will always revert to the DIP switch settings. It is recommended that the printer communication protocol by set by the DIP switches. Note: When DIP switch settings have been modified cycle power to the Keltron LC series printer to enable the new settings.
Page 6: Front Panel Description
Desk Top Mounting: If mounting the Keltron LC series printer on a desk top it is suggested you install rubber feet (available with a peel off backing). This will prevent the unit from drifting on the surface during print mode.
Page 7 Screws may be secured with lock washers. Push the bezel of the printer toward the panel until it latches in the case. Figure Figure 1 1 1 1 Keltron Keltron LC series printer mounting dimensions LC series printer mounting dimensions Figure Figure...
Page 8: Initial Power-Up And Self-Test
Initial Power-Up and Self-Test A self-test feature is built into the Keltron LC series printer. To start this press and hold the <TEST> switch and power up the printer. Continue holding the <TEST> switch until the printer has started printing.
Page 9 Figure Figure Figure Figure 2 2 2 2 ASCII Character Set ASCII Character Set ASCII Character Set ASCII Character Set...
Page 10 150, 300, 600, 1200, 2400, 4800, 9600: Baud Rate 7, 8: Data Even, Odd, None: Parity Note: See DIP switches for default settings, the Keltron LC Series printer will revert to the DIP switch settings should the printer lose power.
Page 11 COUNT OFF Line Counter Printout Note: The Keltron LC series printer has battery backup capability to maintain these settings on power down. Note: The time date stamp will not occur until one second after the final carriage return of a transmission.
Page 12 Fields for Clock/Calendar/Conter/Interval Timer Set: From the Selection Model Menu, press < < < < FEED FEED> > > > to access the menu below: FEED FEED Exits the Set Mode and places the printer ON-LINE <SLCT> EXIT SET MODE BACKUP TO PREVIOUS MENU Exits to Main Set Menu <ADVN>...
Page 13 Keltron he Keltron he Keltron LC Series printer LC Series printer LC Series printer cannot function with expanded width LC Series printer cannot function with expanded width cannot function with expanded width and inverted text cannot function with expanded width...
Page 14: Using A Terminal Emulator Program To Program The Lc Series Printer
Using a Terminal Emulator Program to Program the LC Series Printer The following ASCII commands and ESCAPE functions can be used on a PC using a terminal emulator program (such as PROCOMM or TELIX). ASCII Printer Commands: ASCII Printer Commands:...
Page 15 Keltron he Keltron LC Series printer he Keltron LC Series printer LC Series printer cannot function with expanded width LC Series printer cannot function with expanded width cannot function with expanded width and inverted text cannot function with expanded width...
Page 16: Installing Paper And Ribbon In The Keltron Lc Series Printer
Return the printer to service. 8. When the Keltron printer is out of paper it will automatically be placed offline. When you properly install a new roll of paper, press the <SLCT> button and the printer will resume printing.
Page 17: Warranty
Except as provided above, Keltron Corporation makes no warranty of any kind, express or implied, except that the goods sold under this agreement shall be of the standard quality of Keltron Corporation, and the buyer assumes all risk and liability resulting from the use of the goods. Keltron Corporation neither...