Motorola M900 User Manual page 22

M900.UG.book Page 22 Monday, April 16, 2007 5:22 PM
The phone repeats the voice tag and plays a voice message:
. The M900 then dials the number that was stored with the
Calling
voice tag.
Voice-Activated Number Dialing
You can initiate phone calls by speaking numbers to the M900,
including the *, & and # characters, which will then dial the call
1 Press the Voice Activation key (
The phone plays a voice message:
2 Speak the digits of the phone number that you want to call.
The phone plays a voice message:
that you spoke. The M900 then dials the number that you
spoke.
Voice-Activated Speed Dialing
Each entry in your phonebook is assigned a unique speed dial
number that identifies where the entry is stored in phone memory
or on the SIM card. You can initiate phone calls by speaking this
number to the M900, which will then dial the call.
Note: Voice-activated speed dialing uses M900 phonebook
memory locations 2 through 500. You can access additional
phonebook entries from your SIM card starting at memory location
501, to the limit of your SIM card (usually memory location 660 ).
1 Press the Voice Activation key (
The phone plays a voice message:
2 Say the word " " and then speak the digits of the phonebook
hash
entry that you want to call.
For example:
• To dial phonebook entry 99, say "hash, nine, nine".
22 - Getting Started
) twice.
.
Say number
and repeats the digits
Calling
) twice.
.
Say number