GE JCK1000 Installation Instructions Manual page 4

Installation Instructions
Cutout for 27"
A
Ovens only
Cutout Width
(25 1/4") Max.
Allow 2.5 cm (1") for
overlap of oven over
side edges of cutout
5 cm x 10 cm (2" x 4")
or equivalent runners
level with bottom of
cutout
58.42 cm
(23")
Allow a minimum
of 58.42 cm (23") for
clearance to adjacent
corners, drawers, walls,
etc. when door is open
If the cabinet does not have a solid bottom, two
braces or runners must be installed level with
the bottom of the cutout to support the weight
of the oven. For single ovens, the runners and
braces must support 68 kg (150 lbs.).
NOTE: If marks, blemishes or the cutout
opening are visible above the installed
oven, it may be necessary to add wood
shims under the runners and front trim
until the marks or opening are covered.
(68.6 cm)
Cabinet
Width
68.6 cm
(27")
63.5 cm
(25") Min.
64.1 cm
Cutout
Height
70.2 cm (27 5/8") Min.
71.4 cm (28 1/8") Max.
Recommended
Allow 2.5 cm
cutout location from
(1") minimum
for overlap of
oven top and
bottom of cutout
Single Built-In
Cabinet Width
Recommended
Junction box
Cutout Location
recommended to
be in right side
from Floor
adjacent cabinet
Cutout Depth
Cutout Width
Cutout Height
NOTE: If the cabinet does not
have a front frame and the sides
are less than 1.9 cm (3/4") thick,
shim both sides equally to establish
the cutout width.
61 cm
(24")
These ovens are not approved
for stackable installation.
4
68.6 cm (27")
82.6 cm (32 1/2")
59.7 cm
(23 1/2") Min.
63.5 cm
(25") Min.
64.1 cm
(25 1/4") Max.
70.2 cm
(27 5/8") Min.
71.4 cm
(28 1/8") Max.
5 cm x 10 cm (2" x 4") or
equivalent runners level
with bottom of cutout
45.7 cm (18")
68.6 cm (27")