Replacement Parts; Recommended Accessories - Ikelite ALL Instruction Manual

Problem
Push buttons or
controls are sticky
and hard to operate

Replacement Parts

Main Housing O-ring 0132.45
Replacement Lanyard 0321.10
Replacement Vinyl Port Covers
0200.02 (2"port), 0200 (3" port), 0200.08 (4" port)
Ikelite Lube 5020 (4 - 1cc tubes)
For light lubrication of the main housing o-ring.

Recommended Accessories

A full range of accessories is available to support your housing. Please visit
www.ikelite.com to see the most current information about recommended
accessories.
Tray and Handle(s)
Add stability and gripping point(s) for comfortable use of the housing
above and below water. Some tray and handles offset the slightly
positive buoyancy of the housings. Handles offer attachment points for
external lighting systems.
Solution
- Remove the camera and rinse the closed housing
in freshwater. Vigorously press each push button
in and out several times to release any trapped
saltwater or debris.
- If a control is sticky, grab the control knob, pull it
out, and then push back in.
- Return housing to Ikelite for routine maintenance.
15