D-Link DSL-2750B User Manual page 33

Section 3 - Configuration
For PPPoE/PPPoA connection
Type in the Username and Password (and PPPoE Service Name, if
required by your ISP).
Type service name which is from your ISP on the Servername option.
Choose PPPoE LLC/Snap-Bridging, PPPoE VC-mux, PPPoA
LLC/encapsulation and PPPoA VC-mux.
Set MTU value which you want but should be less than 1492 on the
MTU
Enable the Enable NAT or Fullcone NATwhen you want to have WAN
and LAN.
Enable the Enable Firewall when you want to have the basic filter
function, for example, ICMP ping to DSL-2750B.
PPP IP Extension:
Router passes the obtained IP address to the local PC and acts as a
bridge only modem.
Use Static IPv4 Address:
Enter Static IPv4 Address
Enable the Enable IGMP Multicast to send IGMP query packets to the
IPTV clients.
Enable VLAN and type the VLAN ID (0-4095) which your ISP assigns.
Click on the Next button to go to the next window.
D-Link DSL-2750B User Manual 33