/ Pairing Camera to Wi-Fi Remote
Before using the Wi-Fi Remote for the first time, you must pair it
with your camera.
A. ON THE CAMERA:
Ensure both camera and
1.
remote are powered OFF.
Press the Power/Mode Button
2.
] to power camera ON.
[
Press the Wi-Fi On/Off Button
3.
[
] twice, then press the
Shutter/Select Button [
enter the Wi-Fi menu [
Press the Power/Mode Button
4.
] to cycle to Wi-Fi RC, then
[
press the Shutter/Select Button
[
] to select it.
Press the Power/Mode Button
5.
] to cycle to NEW, then
[
press the Shutter/Select Button
[
] to select it. You will see
[
].
B. ON THE WI-FI REMOTE:
While holding down the Shutter/
1.
Select Button [
release the Power/Mode Button
[
When you see [
2.
the Shutter/Select Button [
] to
[
3.
].
and remote have paired.
The remote will now prompt
4.
CONNECT ANOTHER? camera.
If you want to connect additional
cameras at this time, press the
Shutter/Select Button [
to select YES. If not, press the
Power/Mode Button [
cycle to NO, then press the
Shutter/Select Button [
select it.
], press and
].
] will appear once camera
], release
].
]
] to
] to
Need help?
Do you have a question about the Hero 3+ Black Edition and is the answer not in the manual?
Questions and answers