Table of Contents
Advertisement
Available languages
Available languages
Operating Manual
About your new thermostat
Your new thermostat is pre-programmed and ready to go. All you have to do is
set the time and day. Then check the settings below and change if needed:
1.
Set time and day (required for proper operation)
2.
Select fan setting (Auto/On)
3.
Select system setting (Heat/Cool)
4.
Program schedules:
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ....................................................... See pages 8-9
CAUTION: EQUIPMENT DAMAGE HAZARD. You can override the program schedule at
any time, and manually adjust the temperature (see pages 10-11).
69-2440EFS—01
.................................................. See page 6
....................................... See page 7
Preset to energy-saving levels
2
............. See page 5
570-248
Advertisement
Chapters
Table of Contents
