Axis Camera Management - Multiple Cameras/Large Installa- Tions; Automatic Discovery - Axis M1143-L Installation Manual

Page 10
6. See page 11 for instructions on how to set the password.
AXIS Camera Management - multiple cameras/large installa-
tions
AXIS Camera Management can automatically discover multiple Axis
devices, show connection status, manage firmware upgrades and set IP
addresses.

Automatic discovery

1. Check that the camera is connected to the network and that power
has been applied.
2. Start AXIS Camera Management. When the camera appears in the
window, right-click the link and select Live View Home Page.
3. See page 11 for instructions on how to set the password.
Assign an IP address in a single device
1. Select the network camera in AXIS Camera Management and click
the Assign IP button
Select Assign the following IP address and enter the IP address,
2.
subnet mask and default router the device will use.
Click the OK button.
3.
AXIS M1143-L/M1144-L
.