Table of Contents
Advertisement
Hydra LAN
User Guide
3.3.3 Printer Server
In this section you can enable or disable the printer server and check the details of the
connected USB printer.
3.4 System
In this menu you can configure the basic network settings for the Hydra LAN and find
some details related to the firmware and disk usage.
3.4.1 LAN Settings
In this section you can define the hostname for your Hydra LAN and set up the IP
configuration. We recommend using the "Obtain IP/DNS address automatically". When
selecting a hostname, make sure to use a unique name and not one that has already been
used on the local network.
If required, you can also set the individual IP addresses yourself. If you need assistance in
manually filling out these fields, please contact your network administrator for help.
Note: After changing any of the settings, press the "Save" button to apply the new
configuration and save its settings.
Page 23 / Chapter 3 - Web Configuration
Advertisement
Table of Contents
