File And Print; File Server - Macpower & Tytech Hydra LAN User Manual

Hydra LAN

3.3 File and Print

In this menu, you can configure all the settings related to the FTP, NFS and printer server.
Use this to manage how your files and folders are shared.

3.3.1 File Server

In this section you can modify the server settings and also enable or disable a service.
• Character set: By default, this is set to Traditional Chinese (CP950). If your file names
include characters from another language, change the encoding here and select your
language from the drop down list (e.g. English CP437).
• Windows Setting: In this section, you can change the workgroup that the Hydra LAN
belongs to and modify its description. The IP for the WINS Server (Windows Internet
Name Server) can be left blank unless this is required for your network.
• FTP Server: This service can be enabled or disabled. When enabled, the default FTP
port number will be set to 21 but you can change that if required.
• NFS Server: This service can either be enabled or disabled depending on your
requirements.
• Guest Access: To enable guest access (guest-share), enable it and if required, set a
limit for the disk space. For security reasons, the guest access can also be disabled.
Note: After changing any of the settings, press the "Save" button to apply the new
configuration and save its settings.
Page 21 / Chapter 3 - Web Configuration
User Guide