Table of Contents
Advertisement
Base Unit
Telephone
Modular Wall
(Side View)
Jack
Wall Mount
slots
(Figure 1)
NOTE: If you do not have a standard
modular wall jack, have a qualified
technician mount one on the wall.
Handset Retainer Tab Installation
If the base unit is to be placed in the
wall mount position, the handset retainer
tab must be pulled out, turned around
and placed in the opposite direction, so
that the tab allows the handset to hang
onto the base unit, as shown in figure 2
Handset
Retainer
Tab
(Figure 2)
OPTIONAL AC ADAPTOR
CAUTION: Use only with Class 2
AC Adaptor (not included)with a rating
of 120VAC input, DC6V, 100 mA
output with a center tip that is negative.
The adaptor plug must correctly fit the
machine's DC jack.
1. Plug the AC Adaptor into a standard
AC outlet.
2. Insert the small plug into the DC
jack on the rear of the base.
060512A-1
NOTE: If you wish to order the optional
AC Adaptor, an Accessory Order Form
has provided with this unit.
TELEPHONE SETTINGS
The screen will display prompts to help
Studs
you set up the telephone when you first
install it. You can always get back to
these setup screens by pressing
Modular
OPTIONS.
Wall
NOTE: You can exit feature setup at
Plate
any time by pressing CLEAR or by
lifting the handset when there is no
incoming call.
Language selection
You can select ENGLISH,
ESPANOL(Spanish) or FRANCAIS
(French) as the language in which your
screen prompts are displayed. When you
first install batteries, the screen displays:
1. Press CALL LIST
2. Press OPTIONS to save your
Set contrast
Adjust screen brightness to a
comfortable level, from 1 (light) to 4
(dark).
1. Press OPTIONS repeatedly until
2. Press CALL LIST
AM
12:00
1-01
WHICH LANGUAGE?
or CALL
LIST
until the screen displays
your language selection.
setting, and move to the next option.
the screen displays:
AM
12:00
1-01
2
SET CONTRAST
or CALL
LIST
until the screen displays
the contrast level you prefer.
8
Advertisement
Table of Contents
