Table of Contents
Advertisement
1.
Press DIRECTORY. Then press
CALL LIST
or CALL LIST
to scroll to STORE.
2. Press OPTIONS and the screen
displays ENTER NUMBER
3. Enter the telephone number (up to
24 digits) you want to store. Press
CALL LIST
to backspace and
make corrections
-OR-
Press REDIAL to store the last
number dialed (up to 24 digits).
4. Press OPTIONS, and the screen
displays ENTER NAME.
5. Press CALL LIST
and CALL LIST
add a space. When you want to
enter two character in a row that
share a dial pad key (for example M
and O), you must press CALL
LIST
to move the cursor to the
next position. The screen
automatically returns to idle mode if
you do not press a dial pad key
within 15 seconds.
6. Press OPTIONS to store the name
and number.
NOTE: If the number you entered is
over 24 digits, the screen displays
ONLY 24 ALLOWED.
Store a pause or a flash in a directory
number
Press CALL LIST
twice to store a
pause in the dialing sequence (P
displays). Press FLASH to store a flash
in the dialing sequence for some special
services (F displays).
NOTE: To exit the directory at any time
without saving changes, press CLEAR.
Store a call history number in the
directory
1. Press CALL LIST or CALL
LIST
to scroll through the call
history.
2. Press DIRECTORY to store the
displayed call information in the
060512A-1
to backspace
to advance or
telephone directory. The screen
displays STORED.
NOTE: Call information is stored
exactly as it appears in the call history.
Review directory entries
1. Press DIRECTORY. Then press
CALL LIST
or CALL LIST
to scroll to REVIEW.
2. Press OPTIONS, and the screen
displays the first entry in the
directory.
3. Press CALL LIST
LIST
to scroll through an
alphabetical list of names stored in
the telephone directory.
-OR-
Use the dial pad keys to enter the
first character of the name you
want to view, then press CALL
LIST
if needed to move to the
desired name.
4. Press DIRECTORY or CLEAR to
exit
Dial a directory number
1. Follow the instructions in Review
directory entries above to find the
number you want to call.
2. When the entry you want is
displayed, press DISPLAY DIAL
to make the call. The speakerphone
is activated.
-OR-
Press DISPLAY DIAL, then lift the
handset to make the call.
Delete a directory entry
1. Follow the instructions in Review
directory entries above to find the
number you want to delete.
2. When the number is displayed,
press REMOVE to delete the entry.
Caller ID operation
Information about call history
If you subscribe to caller ID service with
your telephone service provider, this
or CALL
12
Advertisement
Table of Contents
