Charging - M3T MC-6700S User Manual

Charging

• Connect the provided adapter plug to the charging jack of the cradle, and place the
Main Unit or battery to be charged on the cradle.
• The charging status of the battery attached to the Main Unit can be checked through the
LED on the upper left part of the Main Unit. The charging status of the aux. battery can
be checked through the LED on the lower right corner of the cradle.
Charging LED
Classification
Main Unit Charging LED
Cradle Charging LED
(Charging Aux. Battery)
Warning!
• Do not use any other adapters except for the power supply device (5.2V/5A) that comes with
the product.
• Do not use excessive force to plug in the Main Unit or battery. Otherwise, this may cause
problems and you may not receive free warranty service since the problem is due to the fault
of the user.
• Improper battery replacement may cause an explosion.
• When the battery is completely discharged, connect the adapter and reset the device to check
whether the LCD turns on, and then use the device after charging for at least 10 minutes.
LED Status
Red
Green Charging completed
Red
Green Charging completed
Description
Charging
Charging
Aux. Battery
Slot
Main Unit Charging
LED
Cradle Charging LED
(Aux. Battery Charging)
1
M3T
User Manual