Table of Contents
Advertisement
WARSANIS 1401FM USER MANUAL
USING SCA
Most countries will NOT require adjustment of the input level of the
stereo generator. They allow you to generate SCA signals on top of the
MPX signal. This results in a higher devation than "75kHz reading on
your modulation monitor.
If you have finished the LINE UP, switch off the internal sinus wave generator
(don=t forget to change the jumper) and put the cover on the Warsanis
1401FM. If required, connect the SCA generator to the SCA BNC connector at
the rear of the Warsanis 1401FM.
A 19kHz reference output is available on a RCA connector.
No further internal adjustments are necessary for normal operation.
12
Hide quick links:
Advertisement
Table of Contents
