Vocal Distortion; Gate Light Permanent On Or Off; If You Still Have A Problem - Warsanis 1401FM Quick Installation And Setup Manual

WARSANIS 1401FM USER MANUAL
* Locate the multiband clipper diodes on the output board.
* Feed audio into the unit.
* Check on audio at the left side of the left row of diodes (D1, 3, 9, 11, 13, 15 and
17).
For the other channel, check the right side of the right row of diodes (D2, 4, 10, 12,
14, 16, 18, 20).
You should listen to the output of the several bands separately. If no audio is found at
one or two of the diodes, the problem is likely to be a processor failure. Contact your
official Warsanis dealer on how to solve this problem.

VOCAL DISTORTION

* Check the control of the loudness clipping. Reduce this control.
* If the distortion does not decrease check the loudness clippers as described
above.
GATE LIGHT PERMANENT ON OR OFF WITH NORMAL PROGRAM MATERIAL
* This probably indicates a failure of the gating circuity on board 2. Check U13.

IF YOU STILL HAVE A PROBLEM:

Contact your official Warsanis dealer or contact Warsanis customer service in The
Netherlands.
20