Table of Contents
Advertisement
O P E R A T I O N
1. Connect the battery cord to the headlamp or helmet cord.
2. To turn the lamp on, press and release the headlamp
power button. The LED will turn green indicating power. It
is normal for the HID bulb to flicker and change color as
the bulb stabilizes.
3. To turn the lamp off, press and release the power button.
The lamp will go out and the LED will glow amber for four
seconds. During this time the lamp cannot be restruck.
4. When the LED turns red, it is time to recharge your battery.
Turn off your lamp to avoid over-discharging and damaging
your battery.
Note: If the LED is flashing, the battery must be
disconnected to unlock this battery protection feature.
Warning: HID headlamps require adequate airflow during
operation (as in riding conditions). NiteRider discourages use
of the light in stationary conditions as excessive heat
retention can damage the lamp.
9
Advertisement
Table of Contents
