Table of Contents
Advertisement
M O U N T I N G T H E B A T T E R Y
The NiMH battery can be mounted to the bike frame or
placed in a jersey pocket, hydration pack, or fanny pack.
Warning: For safety reasons, a cyclist should never be
tethered to the bike. If the headlamp is mounted to the
helmet, do not mount the battery to the frame. Conversely, if
the headlamp is mounted to the handlebar, do not place the
battery in a pocket or pack.
Frame Mount
1. Thread the wide Velcro strap
through the slots on the top of
the battery clip.
2. Attach the concave surface of
the battery to a safe,
convenient location on the
frame (typically under the top or
down tube), placing the Velcro
strap over the tube but under
any shift or brake cables.
3. Secure the handlebar cord to
the frame using the thin Velcro
tie. Make sure the cord does
not interfere with any moving
parts.
Pocket or Pack
1. Route the helmet cord through a
helmet vent or along the outside of
the helmet using the thin Velcro tie to
secure the cord.
2. Connect the helmet cord to the
battery, making sure the cord does
not interfere with any moving parts.
3. Simply place the battery in a pocket
or pack.
8
Advertisement
Table of Contents
