Transformer - REIMESCH KOMMUNIKATIONSSYSTEME GMBH ALPIN 200 User Manual

5 EXHIBIT INSTALLATION AND SETUP

1.3. TRANSFORMER

To avoid any damages, please remove the transformer
ASSEMBLING AND DISMOUNTING
It is very easy to assemble or to remove the plug-in transformer. There are only very few
connections and screws to other parts of the amplifier.
The Following parts have to be (dis)connected:
• 6 pin plug socket to the high voltage board (only 2 pins connected)
• 9 pin plug socket to main board and G1/G2 board
• 2 pin plug socket to tube deck
• 4 screws on the bottom of the box
ALPIN200 Manual © Copyright 2008 by Reimesch Kommunikationssysteme GmbH
!!! ATTENTION !!!
before shipping.
7