ATV, AV, Component (480i, 480p)
DTV (1080i, 1080p), Component (1080i,
1080p), HDMI (720p, 1080i, 1080p)
■ Digital Noise Filter (Off / Low / Medium / High / Auto) : If the
broadcast signal received by your TV is weak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on the screen.
When the signal is weak, try all the Digital Noise Filter
options until the TV displays the best picture.
■ HDMI Black Level (Normal / Low) : For HDMI signals, select
the black level to adjust the screen depth. Low make blacks look
Available only in HDMI mode (RGB signals).
■ Film Mode (Off / Auto) : Sets the TV to automatically sense and
process ﬁlm signals from all sources and adjusts the picture for
Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
■ Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /
Demo): Enhances motion in fast moving scenes.
The info screen on your TV displays the resolution and
frequency of the incoming video signal (60Hz). This
displayed frequency is not what the TV is displaying by
using the Auto Motion Plus function.
■ LED Motion Plus (Off / On): Removes drag from fast scenes
with a lot of movement to provide a clear picture.
■ Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their factory defaults.
■ Standard: Selects the normal sound mode.
■ Music: Emphasizes music over voices.
■ Movie: Provides the best sound for movies.
■ Clear Voice: Emphasizes voices over other sounds.
■ Amplify: Increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Available in Standard sound mode only.
■ Balance L/R: Adjusts the balance between the right and left
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of speciﬁc bandwidth
■ Reset: Resets the equalizer to its default settings.
SRS TruSurround HD
Available in Standard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves
the problem of playing 5.1 multichannel content through two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all
Digital channels only.
16:9, Zoom1, Zoom2,
Digital-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
16:9, Wide Fit, 4:3,
Multi-Track Sound (MTS)
Analog channels only.
■ Mono: Select for channels that are broadcasting in mono or if
you are having difﬁculty receiving a stereo signal.
■ Stereo: Select for channels that are broadcasting in stereo.
■ SAP: Select to listen to the Separate Audio Program, which is
usually a foreign-language translation.
Because each station has its own broadcasting conditions, the
volume may ﬂuctuate each time you change the channel. This
feature automatically adjusts the volume of a channel by lowering
the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
The SPDIF (Sony Philips Digital InterFace) outputs an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
■ Audio Format (PCM/Dolby Digital): You can select the Digital
Audio output (SPDIF) format. The available Digital Audio output
format may differ depending on the input source.
■ Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
■ Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie
through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the TV's speakers
and the speakers attached to your audio receiver. If this occurs,
set the TV to External Speaker.
■ Reset All: Resets all sound settings to the factory defaults.
- 3 -
You can only select a language from among the ones being
Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
By connecting the TV to a receiver or home theater with
Dolby Digital and 5.1ch speakers and selecting Dolby
Digital, you can maximize your interactive 3D sound
when done (0ms ~ 250ms).
When you set Speaker Select to External Speaker, the
TV's speakers are turned off. You will hear sound through
the external speakers only. When you set Speaker Select
to TV Speaker both the TV's speakers and the external
speakers are on. You will hear sound through both.
When Speaker Select is set to External Speaker, the
buttons will not operate and the
sound settings will be limited.
If there is no video signal, both the TV's speakers and the
external speakers will be mute.