Quick Start - iHome IP39 Instruction Manual

iP39 Quick start
1: Connect to AC power
aux. in
RESET
RESET
TEST T
ST E
time
sync
dst
Attach AC adaptor cable to the DC
jack on back of the iP39 and plug the
other end into a working wall socket
to play and charge iPhone/iPod and
to provide power to the USB port.
Use this insert
For this iPhone/iPod
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free
at 800-288-2792 to purchase one.
4: Time
2: Access slide-out dock
time
set
-1
+1
Press on the dock door on the front
of the unit to release the universal
dock. Push dock back into unit when
not in use.
iPhone 3G
Insert 15
iPhone 3G/3GS
• To use time sync, dock your iPhone/iPod and press the Time
Sync/Time Set Button. The unit will sync to the time on your iPhone/iPod.
• To set time manually, move the DST switch on rear of unit to +1 or -1
(adds or subtracts an hour for daylight saving time or standard time).
• Press & hold the Time Sync/ Time Set button on the back of unit until
the time display flashes. Press the
• Press the Time Sync/ Time Set button. The year display flashes.
Press the
• Press the Time Sync/ Time Set button. The date flashes.
Press the
• Press the Time Sync/ Time Set button to confirm settings.
Select the proper insert for your
iPhone or iPod from the table below
and place in dock. Gently place
iPhone/iPod into dock (iPhone/iPod
must not be in a "skin" or case).
iPhone/iPod
docked. Press the Play Button on
the iP39 to play your iPhone/iPod.
iPod touch 2G
insert 16
iPod Touch 2G
/
/ buttons to set the current year.
/ buttons to set the current date and day.
1 1
3: Dock iPhone/iPod
will charge
iPod nano 5G
insert 18
iPod nano 5G
buttons to set the current time.
while